Remote hands and fault checks
Follow an approved work order, inspect alerts and hardware, trace visible faults and report findings to the remote technical contact.
Request an engineerRemote hands in Docklands
Centersquare LHR2 remote hands.
Uplink provides customer-authorised onsite engineering at Centersquare LHR2 in Docklands.
Data centre operatorCentersquare
FacilityLHR2
Service areaDocklands
Planning distanceAbout 61 road miles
Onsite support for Centersquare LHR2.
Centersquare lists LHR2 at 7 Greenwich View Place, Docklands, E14 9NN. Use the facility name, postcode and rack reference on the access request so the engineer reaches the right building.
LHR2 is also referenced as Former Keppel GV7 lineage. Include both names when the operator booking or shipping label uses the alternate wording.
15 facilities in the coverage register sit in Docklands. That local cluster can help when one work order covers equipment at more than one site.
Facility address.
Centersquare LHR27 Greenwich View PlaceDocklandsE14 9NNRegister statusOperating
Also referenced as Former Keppel GV7 lineage.
The customer must arrange access with Centersquare and authorise Uplink for LHR2 before attendance.
Check the operator location informationData centre services at LHR2.
Rack and stack
Fit rails, install servers, storage or network equipment, connect power and complete the agreed rack layout.
Cabling and patching
Install, label, trace or replace copper, fibre and power connections against the supplied port plan.
Hardware swaps and removal
Replace authorised parts, remove failed equipment or decommission retired systems with a clear completion record.
Independent remote hands, under your control.
Uplink works on customer-owned equipment to the approved scope. Your technical contact keeps control of changes and escalation decisions.
Uplink has no commercial relationship with Centersquare. The operator name and address identify the service location only.
Book an engineer for LHR2.
Name the facility
Use the facility code, full postal address and postcode shown on the access booking.
Describe the equipment
Include the vendor, model, serial number, rack position and any replacement parts already onsite.
Set the change boundary
State what the engineer may disconnect, replace or reconfigure, and who can approve a change.
Arrange access
Nominate Uplink with the operator, confirm the access window and provide the remote escalation contact.
LHR2 remote hands FAQ.
Can Uplink provide remote hands at Centersquare LHR2?
Yes, subject to engineer availability, an agreed work order and access arranged by the customer with Centersquare.
What is the address for LHR2?
The location reference used on this page is 7 Greenwich View Place, Docklands, E14 9NN. Confirm it with the operator when arranging access or sending parts.
What data centre services are available at LHR2?
Uplink can carry out rack and stack work, server and storage installation, copper and fibre patching, hardware fault checks, approved parts replacement and equipment decommissioning.
Can Uplink rack and stack servers at LHR2?
Yes. Send the rack position, rail kit, equipment list, power and network plan, cable labels and the remote contact who can approve any change.
How do I book an onsite data centre engineer for LHR2?
Send LHR2, E14 9NN, the access window, rack reference, equipment details, work scope and escalation contact to matt@uplink.limited.
Is Uplink affiliated with Centersquare?
No. Uplink is an independent engineering company. Centersquare is named only to identify the customer-authorised service location.
Arrange an onsite visit
Send the facility and the work.
Include the facility name, postcode, rack reference, access window, equipment list and the result you need.