Remote hands in Redhill

Galaxy Data Centers Redhill remote hands.

Send an Uplink engineer to Galaxy Data Centers Redhill for hardware, cabling or decommissioning work.

Uplink engineer work example showing power and data cabling in a rack
Uplink work example. The image does not identify Redhill.
Data centre operatorGalaxy Data Centers
FacilityRedhill
Service areaRedhill
Planning distanceAbout 66 road miles

Onsite support for Galaxy Data Centers Redhill.

Galaxy Data Centers lists Redhill at 3 Foxboro Business Park, Redhill, RH1 1AX. Use the facility name, postcode and rack reference on the access request so the engineer reaches the right building.

Redhill is also referenced as Former Navisite Redhill. Include both names when the operator booking or shipping label uses the alternate wording.

1 facility in the coverage register sit in Redhill. That local cluster can help when one work order covers equipment at more than one site.

Deduplicated as one physical facility.

Facility address.

Galaxy Data Centers Redhill3 Foxboro Business ParkRedhillRH1 1AX
Register statusListed; verify current sales

Also referenced as Former Navisite Redhill.

The register records this site as "Listed; verify current sales". Reconfirm the facility name, address and access route with Galaxy Data Centers before booking Uplink.

Check the operator location information

Data centre services at Redhill.

Remote hands and fault checks

Follow an approved work order, inspect alerts and hardware, trace visible faults and report findings to the remote technical contact.

Rack and stack

Fit rails, install servers, storage or network equipment, connect power and complete the agreed rack layout.

Cabling and patching

Install, label, trace or replace copper, fibre and power connections against the supplied port plan.

Hardware swaps and removal

Replace authorised parts, remove failed equipment or decommission retired systems with a clear completion record.

Independent remote hands, under your control.

Uplink works on customer-owned equipment to the approved scope. Your technical contact keeps control of changes and escalation decisions.

Uplink has no commercial relationship with Galaxy Data Centers. The operator name and address identify the service location only.

Book an engineer for Redhill.

  1. Name the facility

    Use the facility code, full postal address and postcode shown on the access booking.

  2. Describe the equipment

    Include the vendor, model, serial number, rack position and any replacement parts already onsite.

  3. Set the change boundary

    State what the engineer may disconnect, replace or reconfigure, and who can approve a change.

  4. Arrange access

    Nominate Uplink with the operator, confirm the access window and provide the remote escalation contact.

Redhill remote hands FAQ.

Can Uplink provide remote hands at Galaxy Data Centers Redhill?

Yes, subject to engineer availability, an agreed work order and access arranged by the customer with Galaxy Data Centers.

What is the address for Redhill?

The location reference used on this page is 3 Foxboro Business Park, Redhill, RH1 1AX. Confirm it with the operator when arranging access or sending parts.

What data centre services are available at Redhill?

Uplink can carry out rack and stack work, server and storage installation, copper and fibre patching, hardware fault checks, approved parts replacement and equipment decommissioning.

Can Uplink rack and stack servers at Redhill?

Yes. Send the rack position, rail kit, equipment list, power and network plan, cable labels and the remote contact who can approve any change.

How do I book an onsite data centre engineer for Redhill?

Send Redhill, RH1 1AX, the access window, rack reference, equipment details, work scope and escalation contact to matt@uplink.limited.

Is Uplink affiliated with Galaxy Data Centers?

No. Uplink is an independent engineering company. Galaxy Data Centers is named only to identify the customer-authorised service location.

Send the facility and the work.

Include the facility name, postcode, rack reference, access window, equipment list and the result you need.