Remote hands and fault checks
Follow an approved work order, inspect alerts and hardware, trace visible faults and report findings to the remote technical contact.
Request an engineerRemote hands in Feltham
Serverfarm / DataBank LON1 / LHR1 remote hands.
Send an Uplink engineer to Serverfarm / DataBank LON1 / LHR1 for hardware, cabling or decommissioning work.
Data centre operatorServerfarm / DataBank
FacilityLON1 / LHR1
Service areaFeltham
Planning distanceAbout 48 road miles
Onsite support for Serverfarm / DataBank LON1 / LHR1.
Serverfarm / DataBank lists LON1 / LHR1 at Unit 4, Westgate Industrial Estate, Feltham, TW14 8RS. Use the facility name, postcode and rack reference on the access request so the engineer reaches the right building.
LON1 / LHR1 is also referenced as DataBank LHR1 listing. Include both names when the operator booking or shipping label uses the alternate wording.
1 facility in the coverage register sit in Feltham. That local cluster can help when one work order covers equipment at more than one site.
Deduplicated because both names point to the same physical address.
Facility address.
Serverfarm / DataBank LON1 / LHR1Unit 4, Westgate Industrial EstateFelthamTW14 8RSRegister statusOperating; verify current contracting entity
Also referenced as DataBank LHR1 listing.
The register records this site as "Operating; verify current contracting entity". Reconfirm the facility name, address and access route with Serverfarm / DataBank before booking Uplink.
Check the operator location informationData centre services at LON1 / LHR1.
Rack and stack
Fit rails, install servers, storage or network equipment, connect power and complete the agreed rack layout.
Cabling and patching
Install, label, trace or replace copper, fibre and power connections against the supplied port plan.
Hardware swaps and removal
Replace authorised parts, remove failed equipment or decommission retired systems with a clear completion record.
Independent remote hands, under your control.
Uplink works on customer-owned equipment to the approved scope. Your technical contact keeps control of changes and escalation decisions.
Uplink has no commercial relationship with Serverfarm / DataBank. The operator name and address identify the service location only.
Book an engineer for LON1 / LHR1.
Name the facility
Use the facility code, full postal address and postcode shown on the access booking.
Describe the equipment
Include the vendor, model, serial number, rack position and any replacement parts already onsite.
Set the change boundary
State what the engineer may disconnect, replace or reconfigure, and who can approve a change.
Arrange access
Nominate Uplink with the operator, confirm the access window and provide the remote escalation contact.
LON1 / LHR1 remote hands FAQ.
Can Uplink provide remote hands at Serverfarm / DataBank LON1 / LHR1?
Yes, subject to engineer availability, an agreed work order and access arranged by the customer with Serverfarm / DataBank.
What is the address for LON1 / LHR1?
The location reference used on this page is Unit 4, Westgate Industrial Estate, Feltham, TW14 8RS. Confirm it with the operator when arranging access or sending parts.
What data centre services are available at LON1 / LHR1?
Uplink can carry out rack and stack work, server and storage installation, copper and fibre patching, hardware fault checks, approved parts replacement and equipment decommissioning.
Can Uplink rack and stack servers at LON1 / LHR1?
Yes. Send the rack position, rail kit, equipment list, power and network plan, cable labels and the remote contact who can approve any change.
How do I book an onsite data centre engineer for LON1 / LHR1?
Send LON1 / LHR1, TW14 8RS, the access window, rack reference, equipment details, work scope and escalation contact to matt@uplink.limited.
Is Uplink affiliated with Serverfarm / DataBank?
No. Uplink is an independent engineering company. Serverfarm / DataBank is named only to identify the customer-authorised service location.
Arrange an onsite visit
Send the facility and the work.
Include the facility name, postcode, rack reference, access window, equipment list and the result you need.