Remote hands and fault checks
Follow an approved work order, inspect alerts and hardware, trace visible faults and report findings to the remote technical contact.
Request an engineerRemote hands in Docklands
Equinix LD8 remote hands.
Send an Uplink engineer to Equinix LD8 for hardware, cabling or decommissioning work.
Data centre operatorEquinix
FacilityLD8
Service areaDocklands
Planning distanceAbout 61 road miles
Onsite support for Equinix LD8.
Equinix lists LD8 at 6/7/8/9 Harbour Exchange Square, Limeharbour, Docklands, E14 9GE. Use the facility name, postcode and rack reference on the access request so the engineer reaches the right building.
The page is for teams that already have equipment at LD8 and need an independent data centre engineer onsite. Uplink does not sell colocation space at this address.
15 facilities in the coverage register sit in Docklands. That local cluster can help when one work order covers equipment at more than one site.
Address checked against the current Equinix LD8 page.
Facility address.
Equinix LD86/7/8/9 Harbour Exchange Square, LimeharbourDocklandsE14 9GERegister statusOperating
The customer must arrange access with Equinix and authorise Uplink for LD8 before attendance.
Check the operator location informationData centre services at LD8.
Rack and stack
Fit rails, install servers, storage or network equipment, connect power and complete the agreed rack layout.
Cabling and patching
Install, label, trace or replace copper, fibre and power connections against the supplied port plan.
Hardware swaps and removal
Replace authorised parts, remove failed equipment or decommission retired systems with a clear completion record.
Independent remote hands, under your control.
Uplink works on customer-owned equipment to the approved scope. Your technical contact keeps control of changes and escalation decisions.
Uplink has no commercial relationship with Equinix. The operator name and address identify the service location only.
Book an engineer for LD8.
Name the facility
Use the facility code, full postal address and postcode shown on the access booking.
Describe the equipment
Include the vendor, model, serial number, rack position and any replacement parts already onsite.
Set the change boundary
State what the engineer may disconnect, replace or reconfigure, and who can approve a change.
Arrange access
Nominate Uplink with the operator, confirm the access window and provide the remote escalation contact.
LD8 remote hands FAQ.
Can Uplink provide remote hands at Equinix LD8?
Yes, subject to engineer availability, an agreed work order and access arranged by the customer with Equinix.
What is the address for LD8?
The location reference used on this page is 6/7/8/9 Harbour Exchange Square, Limeharbour, Docklands, E14 9GE. Confirm it with the operator when arranging access or sending parts.
What data centre services are available at LD8?
Uplink can carry out rack and stack work, server and storage installation, copper and fibre patching, hardware fault checks, approved parts replacement and equipment decommissioning.
Can Uplink rack and stack servers at LD8?
Yes. Send the rack position, rail kit, equipment list, power and network plan, cable labels and the remote contact who can approve any change.
How do I book an onsite data centre engineer for LD8?
Send LD8, E14 9GE, the access window, rack reference, equipment details, work scope and escalation contact to matt@uplink.limited.
Is Uplink affiliated with Equinix?
No. Uplink is an independent engineering company. Equinix is named only to identify the customer-authorised service location.
Arrange an onsite visit
Send the facility and the work.
Include the facility name, postcode, rack reference, access window, equipment list and the result you need.